Data Input Module. The
DATI-SL is a Slave module and must be connected to a FBAI-M Master module
for proper operation. A front panel rotary switch selects the signal type for
transmission. Only one basic signal type can be selected for transmission at any one
time, however, eight static signals or switch contact closures can be sent simultaneously
along with the RS422 or RS485 data signals.
Data Output Module.
The DATO-SL is a Slave module and must be connected to a FBAI-M Master
module for proper operation. A front panel rotary switch selects the signal type for
reception.
Data Rates. A
150kBit/sec data stream will have a jitter of 10%. A 15.0kBit/sec data stream will
have a jitter of 1%.
Bi-Directional Data.
For full bi-directional data capability, two transmission systems must be operational,
each transmitting in opposite directions. This requires a minimum of two fibers, one
for each direction of signal transmission. An interlink cable, DAT-CBL, between the
DATA I/O modules at each end of the system re-creates the bi-directional signal path for
the data.
Data Features
Data Input Module. The
DATI-SL is a Slave module and must be connected to a FBAI-M Master module
for proper operation. A front panel rotary switch selects the signal type for
transmission. Only one basic signal type can be selected for transmission at any one
time, however, eight static signals or switch contact closures can be sent simultaneously
along with the RS422 or RS485 data signals.
Data Output Module.
The DATO-SL is a Slave module and must be connected to a FBAI-M Master
module for proper operation. A front panel rotary switch selects the signal type for
reception.